Computational analysis of thin coating layer failure using a cohesive model and gradient plasticity

Thermal barrier coatings (TBC) are widely used to prevent transient high temperature attack and allow components high durability. Due to strong inhomogeneous material properties the TBC failure often initiates near the interface between the brittle oxide layer and the ductile substrate. A reliable prediction of the TBC failure requires detailed information about the crack tip field and the consequent fracture criteria. In the present paper both cohesive model and gradient plasticity are used to simulate the failure process and to study interdependence of the interface stress distribution with the specific fracture energies. Computations confirm that combination of the two models is able to simulate different failure mechanisms in the TBC system. The computational model has the potential to give a realistic prediction of the crack propagation process.     

化学复合镀层激光处理研究

研究了激光处理对Ni-P -SiC化学复合镀层的影响。借助于扫描电镜、能谱仪、X射线衍射、显微硬度计等设备对激光处理后复合镀层的表面形貌、组织结构及性能进行了综合分析。结果表明 ,对复合镀层进行激光处理可以获得与炉内加热同样的镀层硬度 ,且当激光功率 4 0 0W ,扫描速度 1.5m /min时 ,镀层硬度高于炉内加热的硬度     

光纤激光器相干组束技术

综述了目前国内外光纤激光器相干组束的研究现状，分析了几种典型的相干组束技术，对相干组束研究的前景做了简单评述和展望。     

应用激光活化饵料藻种的研究

应用Nd:YAG激光(波长1.06μm,功率5w,照射时间0.5-3 min)和Ar+激光(波长488nm,功率70mw,照射时间5-15min)对长期保存的不同保存形式的塔胞藻(Pyramidomonassp.)进行辐照处理。研究了不同剂量激光辐照对藻体生长和叶绿素含量的影响。实验结果表明:照射剂量为60s的Nd:YAG激光及剂量为15min的Ar+激光对液体保存形式的藻种有较明显的促长效果,接种后这两种激光处理组的比生长速率分别较对照提高达53.33%和28.89%,叶绿素含量分别增加73.33%和65.69%。两种激光对液体保存藻种的活化效果均好于固体保存种。     

河口海岸近底层潮流速分布模式初步研究

许多现场实测资料表明,潮流近底流速剖面偏离传统的对数分布。虽然偏离值可能不大,但利用对数剖面去计算河底粗糙长度和剪切应力时会引起较大的误差。有研究者的数值试验表明,如果通过流速是对数分布来估计粗糙长度和底部切应力,偏差可能超过100%(Kuo等,1996)。本文从流体动力学原理出发,利用Prandtl混合长度和Von Karman自相似理论,建立河口海岸近底层潮流速分布的对数线性模式。通过对英国大陆南部西Solent水道实测水流垂向分布进行枚举粗糙长度z0结合最小二乘法拟合,并将计算结果与传统的对数模式的结果比较,表明本文模式有以下优点:①精度高,计算值更接近实测值;②所确定的粗糙长度z0和摩阻流速u*的相关系数更高,且两者在相位上更趋一致。     

脉冲式半导体激光器准直光学系统的设计

根据具体的探测环境和探测精度,通过理论分析,提出了脉冲式半导体激光器准直光束的单透镜设计方法和柱面透镜的设计方法,并且给出了具体的设计参数。可以获得高斯光束的准直发散角为1.48mrad;高斯光束的腰粗为0.325mm。     

High resistivity measurement of SiC wafers using different techniques

To establish fast, nondestructive, and inexpensive methods for resistivity measurements of SiC wafers, different resistivity-measurement techniques were tested for characterization of semi-insulating SiC wafers, namely, the four-point probe method with removable graphite contacts, the van der Pauw method with annealed metal and diffused contacts, the current-voltage (I-V) technique, and the contactless resistivity-measurement method. Comparison of different techniques is presented. The resistivity values of the semi-insulating SiC wafer measured using different techniques agree fairly well. As a result, application of removable graphite contacts is proposed for fast and nondestructive resistivity measurement of SiC wafers using the four-point probe method. High-temperature van der Pauw and room-temperature Hall characterization for the tested semi-insulating SiC wafer was also obtained and reported in this work.     

基于对地观测激光回波特征的目标特性研究

本文研究了对地观测激光回波特征与地面目标特征之间的关系模型，分析了分类地面目标的激光回波特征，提出一种基于查表法的目标特性计算方法并给出了仿真结果。     

基于Gabor展开的水下目标激光探测的信号检测与识别

针对水下目标激光探测的信号检测与识别的问题 ,通过对回波信号的Gabor展开进行分析 ,建立了局部窗口多重相关的峰值检测方法 ,以及利用系数矩阵的迹和特征值描述目标的反射性能 ,实现了对目标的分类识别。实验表明 ,上述方法对目标的有效检测率达 93 0 % ,分类识别有效率达 83 2 %。